Rays Engineering Wheels Brembo Clearance Round 1: Volk Racing Forged One Piece

Rays Wheels Brembo Clearance can be hard to figure out.

Here is a detailed listed that should clear up some of the confusion.

As we all know the Brembos can be a bit challenging finding a wheel that fits without spacers or other modifications.

Here is a list of Volk Racing Wheels that Clear Subaru Impreza WRX STi Brembos. This includes all GD brembos and GR Brembos. Specific model years this article applies to are 2002-2009 Subaru Impreza WRX and Subaru Impreza WRX STi models with Brembo Brake Calipers.

The sizes listed don’t all “just fit”, some may require extensive work or even a Widebody. Any specific fitment questions feel free to shoot me a message. Contact Info

Bolt on fitments are are highlighted in bold and have an * after them.

Rays Engineering Volk Racing Wheels

Forged One Piece Wheels

To make things easier, I’ll separate by bolt pattern.

First up are the 5×114.3. The 5×114.3 bolt pattern applies to all 05-09 Subaru Impreza WRX STi GD and GR chassis cars.

5×114.3

CE28N
Volk Racing CE28N

17×7.5 +33mm
17×8 +33mm, +38mm, +44mm*
17×8.5 +25mm, +30mm, +40mm*, +50mm*
17×9 +15mm, +22mm, +23mm, +35mm, +40mm
17×9.5 +15mm, +22mm, +28mm, +40mm, +47mm
17×10 +15mm
18×7.5 +33mm
18×8 +33mm, +38mm
18×8.5 +25mm, +30mm, +40mm*, +52mm*
18×9 +35mm, +40mm, +50mm
18×9.5 +15mm, +22mm, +28mm, +34mm, +40mm, +47mm
18×10.5 +18mm
19×8 +43mm
19×8.5 +22mm, +29mm, +35mm, +43mm*
19×9.5 +12mm, +22mm
19×10.5 +12mm, +22mm

CE28NF
Volk Racing CE28NF

17×8 +33mm, +38mm, +47mm
17×8.5 +53mm*
18×7.5 +25mm
18×8 +33mm, +38mm

RE30
Volk Racing RE30

17×8.5 +50mm* (S1)
17×8.5 +25mm, +30mm, +40mm* (S2)
17×9 +35mm, +40mm (S2)
17×9.5 +40mm (S3)
17×9.5 +28mm (L1)
17×10 +15mm (L2)
18×8 +33mm, +38mm, +44mm* (S1)
18×8.5 +52mm* (S1)
18×8.5 +25mm, +30mm, +40mm*, +44mm* (S2)
18×9 +35mm, +40mm, +50mm
18×9.5 +40mm, +47mm (S2)
18×9.5 +28mm, +35mm (L1)
18×10.5 +18mm, +25mm (L2)
19×8 +30mm, +40mm*, +44mm* (S1)
19×9 +25mm, +40mm (S2)
19×10 +30mm (L1)
19×11 +25mm (L2)

TE37
Volk Racing TE37

17×8 +33mm, +38mm
17×8.5 +30mm, +40mm*
17×9 +0mm, +15mm, +22mm, +28mm, +40mm
17×9.5 +12mm, +28mm, +35mm, +40mm
17×10 +18mm
18×7.5 +30mm
18×8.5 +22mm, +30mm, +40mm*
18×9 +40mm
18×9.5 +12mm, +22mm, +35mm, +40mm
18×10.5 +15mm, +22mm
19×8.5 +22mm, +29mm, +30mm, +35mm, +43mm*
19×9.5 +12mm, +22mm, +35mm, +43mm
19×10.5 +12mm, +22mm

Next up are the 5×100 models. There are significantly fewer 5×100 Volk Racing Forged Monoblock wheels that clear the Subaru Impreza WRX STi Brembo brake calipers.

These wheels will clear the brakes on all 5×100 equipped Subarus including the GC chassis Impreza when equipped with Brembos.

All of the *BOLD models can be made to work on the 2002-2009 Subaru Impreza WRX and Subaru Impreza 2.5 models.

All of the *BOLD models can be made to work on the 2004 Subaru Impreza WRX STi.

5×100

CE28N
Volk Racing CE28N

17×8 +38mm, +44mm*
17×8.5 +40mm*, +44mm*
17×9 +43mm
18×8 +38mm, +44mm*
18×8.5 +44mm*
19×8 +43mm*

CE28NF
Volk Racing CE28NF

17×8 +38mm, +44mm*, +47mm*
18×8 +38mm, +44mm*

RE30
Volk Racing RE30

17×8.5 +40mm*, +44mm* (S1)
17×9 +43mm (S2)
18×8 +44mm* (S1)
18×8.5 +44mm* (S2)

TE37
Volk Racing TE37

17×8 +38mm, +44mm*

Any companies looking to support the website and advertise on this article feel free to email me.

4 thoughts on “Rays Engineering Wheels Brembo Clearance Round 1: Volk Racing Forged One Piece”

  1. Hi, the TE37 in the pictures above i believe are 19′. 18′ for Impreza would look not as pretty as those (sunken centre and smaller end spokes, GT-R aggressive looks). Correct? I’ve never seen the aggressive GT-R looks TE37 like this on any Impreza STI.

    So if I want that kinda look for my 2006 STI, what size, offset and tire size would I need? Love the 19′ TE37 on GT-R and Z33! (19×9.5) but I would be happier if I can get 18′ that looks like that or 19×8.5 is the only answer so I dont need to roll fenders?

    FYI, still on stock Brembo brakes and am using Tein SS coilovers.

    Many thanks! 🙂

  2. to get the concave face on an 18″ TE37 you need the 18×9.5 +22mm and that doesn’t exactly “fit” without extensive work.

    the concave face for the 19s start at 19×9.5 +43mm which does clear and you’ll need to modify the rear fenders and have a stiff suspension.

    to fit a 9.5″ read this.

    http://t3hclap.com/archives/11

  3. I was looking into buying a set of te37 17×8 ET35 5×100 CB 57.1 and was looking around to see what kinda work i would need to do but couldnt find a straight answer. Any information would be great.

    Im also currently on coilovers with camber plates in front and camber bolts in rear if thats any help. Thanks!

Leave a Reply