Comments on: Rays Engineering Wheels Brembo Clearance Round 1: Volk Racing Forged One Piece

By: 16" te37 will 308mm brembo kit fit under

16" te37 will 308mm brembo kit fit under — Wed, 25 Feb 2009 17:33:54 +0000

[...] Dunno about 16" but here are the Rays 17-19" that clear Brembos, drop him an email: There’s a related article on Rays and the std 4 pots (which is what I have). PCD 5×100 I guess for 16"? Rays Engineering Wheels Brembo Clearance Round 1: Volk Racing Forged One Piece t3h_Clap’s Whee… [...]

By: t3h_Clap

t3h_Clap — Thu, 19 Feb 2009 14:52:10 +0000

to get the concave face on an 18″ TE37 you need the 18×9.5 +22mm and that doesn’t exactly “fit” without extensive work.

the concave face for the 19s start at 19×9.5 +43mm which does clear and you’ll need to modify the rear fenders and have a stiff suspension.

to fit a 9.5″ read this.

http://t3hclap.com/archives/11

By: Jake

Jake — Mon, 09 Feb 2009 05:19:42 +0000

Hi, the TE37 in the pictures above i believe are 19′. 18′ for Impreza would look not as pretty as those (sunken centre and smaller end spokes, GT-R aggressive looks). Correct? I’ve never seen the aggressive GT-R looks TE37 like this on any Impreza STI.

So if I want that kinda look for my 2006 STI, what size, offset and tire size would I need? Love the 19′ TE37 on GT-R and Z33! (19×9.5) but I would be happier if I can get 18′ that looks like that or 19×8.5 is the only answer so I dont need to roll fenders?

FYI, still on stock Brembo brakes and am using Tein SS coilovers.

Many thanks!